Information
The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time. Capable of 3-in-1 versatility (mulching, bagging and optional side discharging), it helps you tackle whatever challenges come your way with top-notch results.
Highlights
Sale Price $1,999.00 Location Boerne TX Condition New Year 2024 Make SCAG Power Equipment Model SFC-21 SFC-21-7CV Engine Model: CV224 | Type: 4 cycle, OHV, Heavy-duty industrial/commercial Transmission GT MG 512 transmission, 3-speed Fuel Type Gas Status Available Width 23.25" Height Operating Position (low / high): 32.75" / 43.5" | Storage Position: 22" | Cutting: 1.5" to 4.5" in 0.5" increments
Specifications
Year 2024 Manufacturer SCAG Power Equipment Model Name SFC-21 Trim Name SFC-21-7CV Generic Type (Primary) Walking Engine Model: CV224 | Type: 4 cycle, OHV, Heavy-duty industrial/commercial Engine Manufacturer Kohler® Command PRO® Starter Easy-Pull™ recoil start Engine Power Horsepower: 7HP @ 3300 RPM Displacement 224 cc Cylinder Liners One with cast-iron cylinder bore Cooling System air-cooled Fuel Type gas Air Cleaner Quad-Clean™ four-stage Air Filter cyclonic air filter Exhaust Front discharge muffler with guard Governor Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm Drive System Transmission Transmission GT MG 512 transmission, 3-speed Steering Travel Control: Variable drive control bar and 3-speed selector lever on handlebar Drive Shaft 0.50" diameter Clutch Type: Heavy-duty Blade Brake Clutch (BBC) Tires, Rear Specification 10.5 x 3 Tires, Front Specification 9 x 2.25 Top Speed Forward: Up to 4.25 mph Pump Type Oil: Steel oil pump; Full pressure lubrication with spin-on oil filter Deck Thickness 14 gauge Dimensions Handle Bars: 1" diameter, thick wall tubing, 3-position adjustable | Cutter Blade: 0.1345 in. thick, milled edge, wear resistant Length Operating Position: 63.0 - 68.5" | Storage Position: 41" Width 23.25" Height Operating Position (low / high): 32.75" / 43.5" | Storage Position: 22" | Cutting: 1.5" to 4.5" in 0.5" increments Cutting Width 21 inches (53.34 cm) Track Width 21.2" Fuel Capacity 1 gallon (3.785 liters) plastic tank Weight without bagger: 138 lb | with bagger: 143 lb Features Safety Group: Handle actuated operator presence system Construction Material, Deck 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped.
