The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time. Capable of 3-in-1 versatility (mulching, bagging and optional side discharging), it helps you tackle whatever challenges come your way with top-notch results.
- 2024
- SCAG Power Equipment
- SFC-21
- SFC-21-7CV
- Walking
- Model: CV224 | Type: 4 cycle, OHV, Heavy-duty industrial/commercial
- Kohler® Command PRO®
- Easy-Pull™ recoil start
- Horsepower: 7HP @ 3300 RPM
- 224 cc
- One with cast-iron cylinder bore
- air-cooled
- gas
- Quad-Clean™ four-stage
- cyclonic air filter
- Front discharge muffler with guard
- Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm
- Transmission
- GT MG 512 transmission, 3-speed
- Travel Control: Variable drive control bar and 3-speed selector lever on handlebar
- 0.50" diameter
- Type: Heavy-duty Blade Brake Clutch (BBC)
- 10.5 x 3
- 9 x 2.25
- Forward: Up to 4.25 mph
- Oil: Steel oil pump; Full pressure lubrication with spin-on oil filter
- 14 gauge
- Handle Bars: 1" diameter, thick wall tubing, 3-position adjustable | Cutter Blade: 0.1345 in. thick, milled edge, wear resistant
- Operating Position: 63.0 - 68.5" | Storage Position: 41"
- 23.25"
- Operating Position (low / high): 32.75" / 43.5" | Storage Position: 22" | Cutting: 1.5" to 4.5" in 0.5" increments
- 21 inches (53.34 cm)
- 21.2"
- 1 gallon (3.785 liters) plastic tank
- without bagger: 138 lb | with bagger: 143 lb
- Safety Group: Handle actuated operator presence system
- 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped.
- $1,999.00
- Boerne TX
- New
- 2024
- SCAG Power Equipment
- SFC-21 SFC-21-7CV
- Model: CV224 | Type: 4 cycle, OHV, Heavy-duty industrial/commercial
- GT MG 512 transmission, 3-speed
- Gas
- Available
- 23.25"
- Operating Position (low / high): 32.75" / 43.5" | Storage Position: 22" | Cutting: 1.5" to 4.5" in 0.5" increments